Keystone Multi-Quat Sanitizer

Features & Benefits:

Broad-range sanitizer, effective at 200-400 ppm

No-rinse procedure for simple sanitization

Quick, convenient application

Color-coded for easy product identification

Economical foodservice sanitizing

Uses/Solutions:

Non-porous food contact surfaces – tables, counters, utensils and food processing equipment.

Other hard nonporous surfaces – garbage storage areas, garbage bins and toilet bowls

Effective Against/On:

Escherichia coli*

Staphylococcus aureus*

(*When used at 0.25 oz-0.67 oz. per 1 gallon of 400 ppm hard water (200 ppm to 400 ppm active quat))

Campylobacter jejuni**

Enterobacter sakazakii**

Escherichia coli and Escherichia coli O157:H7**

Klebsiella pneumoniae**

Listeria monocytogenes**

Salmonella choleraesuis**

Shigella sonnei**

Staphylococcus aureus**

Yersinia enterocolitica**

(**When used at 0.32 oz.-0.67 oz. per 1 gallon of 500 ppm hard water (200 ppm to 400 ppm active quat))

Dilution Rates:

• Spray bottle: 250 ppm 0.42 oz/gal
• 3 – comp sink: 250 ppm 0.42 oz/gal
• Sanitizer pail w/cloths: 350 ppm 0.58 oz/gal

Directions for Use:

• Please refer to product label for complete directions

Restaurant and Bar Rinse - Sanitizing Eating and Drinking Utensils

1. Scrape and pre-flush utensils to remove excess soil.
2. Wash with good detergent or compatible cleaner (see your Ecolab representative for a recommendation).
3. Rinse with potable water.
4. Sanitize in a solution of 0.25 oz.-0.67 oz. of Keystone Multi-Quat Sanitizer to 1 gallon of 400 ppm water (200-400 ppm active quat). In Wisconsin, sanitize in a solution of 0.32 oz.-0.67 oz. Keystone Multi-Quat Sanitizer to 1 gallon of 500 ppm water (200-400 ppm active quat).
5. Immerse all utensils for at least 1 minute. Use 2 minutes exposure time if required by governing sanitary code.
6. Drain and air dry.

Deodorizing Directions:

• This product deodorizes garbage storage areas, garbage bins, toilet bowls and any other hard nonporous surfaces in odor causing areas.

1. Mix ½ oz. per gallon of water and apply solution to surfaces.
2. Thoroughly wet surfaces, allow to air dry.

Non-Food Contact Surface Sanitizing:

1. Add 0.34 oz. of Keystone Multi-Quat Sanitizer per 1 gallon of water (200 ppm active quat) to sanitize hard, nonporous non-food contact surfaces.
2. Apply sanitizer use-solution with a cloth, mop, sponge, sprayer or by immersion.
3. For sprayer applications, use a coarse spray device.
4. Spray 6-8 inches from surface. Do not breathe spray.
5. Treated surfaces must remain wet for 60 seconds.
6. Wipe dry with a sponge, mop, or cloth or allow to air dry.

Additional Notes:

• For concentration testing, use quat test kit # 417, or QT 40 test strips (.25 - .67 oz/gal = 200 - 400 ppm)