Back

Triplet Plus (Keystone)

The triple threat removes fats and wax, emulsifies/suspends oils, and dissolves milkstone and protein buildup. With triple power cleaning it’s 1-2-3 you’re done, plus EPA registration.

  • SUPC Number: 7637442
  • Ecolab PIC: 6100075
  • GTIN Number: 10025469610758
Order Now
Features & Benefits

Features & Benefits:

Triple-powered cleaning action

Effective on dairy fats, wax and protein build-up

EPA registered

Uses/Solutions:

Soft serve machines

Effective Against/On:

Dairy fats, wax and protein build-up

How To Use

Shake and Soft Serve Machine Cleaning Procedures:

  1. Remove mix from the machine. If local health codes permit rerun, place mix in sanitized rerun container and store in refrigerated cooler.
  2. Rinse the interior of the machine (cylinder, feed tubes, etc.) by activating the "Wash" cycle and drawing through 2 gallons of lukewarm water. Repeat the rinsing procedure until the water runs clear. Turn the machine to the "Off" position.
  3. Prepare a cleaning solution of Triplet Plus by dissolving 1 packet in 2-1/2 gallons of lukewarm water.
  4. Clean the interior of the machine by activating the "Wash" cycle and filling the cylinder and feed tubes with the cleaning solution. Turn the machine to the "Off" position. Brush clean the feed tube and inlet hole. With the cleaning solution in the cylinder, reactivate the "Wash" cycle and allow to remain on for five minutes.
  5. Drain the solution from the machine. Turn machine to the "Off" position.
  6. Remove and completely disassemble all machine parts (doors, blades, pump, etc.).
  7. Brush wash all disassembled parts in a suitable detergent in a clean sink.
  8. Rinse thoroughly under clean running water.
  9. Sanitize parts by immersing for at least 1 minute in a fresh Triplet Plus (Keystone) solution (1 packet dissolved in 2-1/2 gallons / 9.5 liters of lukewarm water).
  10. Remove parts and allow to air dry.
  11. Repeat the cleaning procedure for machines with two freezing cylinders.

Sanitizing Procedures:

  1. Following manufacturer's instructions, reassemble the machine.
  2. Prepare a sanitizing solution by dissolving 1 packet of Triplet Plus (Keystone) in 2-1/2 gallons of lukewarm water.
  3. Sanitize the interior of the machine by activating the "Wash" cycle and filling the cylinder and feed tubes with the sanitizing solution. Allow the "Wash" cycle to run for 5 minutes.
  4. Drain the solution from the machine. Turn machine to the "Off" position.
  5. Repeat the sanitizing procedure for machines with two freezing cylinders. Do not rinse.
Top